Robotic Accessories – Technical Hut

4 pcs 100 RPM Metal Gear Motor With clamps

admin — Fri, 21 Feb 2025 09:35:11 +0000

You will get 4 pcs of best quality metal gear motor in this order which can be used in robot designing and many other projects.

Package include: 100 RPM Motors – 4 pcs, L Clamps – 4 pcs

4 pcs 100 RPM Metal Gear Motor With Wheels (7×2 cm) and Clamps

admin — Wed, 19 Feb 2025 13:47:50 +0000

You will get 4 pcs of best quality metal gear motor in this order which can be used in robot designing and many other projects.

Package include: 100 RPM Motors – 4 pcs, Tyres 7×2 cm – 4 pcs, L Clamps – 4 pcs

4 pcs 100 RPM Metal Gear Motor With Wheels (7×2 cm)

admin — Wed, 19 Feb 2025 13:29:10 +0000

You will get 4 pcs of best quality metal gear motor in this order which can be used in robot designing and many other projects.

Package include: 100 RPM Motors – 4 pcs, Tyres 7×2 cm – 4 pcs

Robot platform chassis with 4 Dual Shaft BO motor

admin — Wed, 10 May 2023 08:32:34 +0000

This is the cheapest and best quality handmade robotic platform for students. This is ideal for robotics projects.

Package include: Assembled Robot Platform – 1 Piece

L293D Motor Driver Module for Robotics Projets

admin — Sat, 08 Apr 2023 11:14:32 +0000

This is an L293d Motor Driving Module. It is an l293d module that can drive a 4 DC Motor in one direction, or drive a 2 DC Motor in both directions. The terminal blocks for connecting motors and power supply and berg sticks for control signals from the microcontroller.

Click here to watch the video of this product

Flame Sensor infrared Receiver Ignition source detection module

admin — Sat, 08 Apr 2023 10:46:54 +0000

This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm.

Greater the flame, farther the test distance. It has the Detect angle of 60 and very sensitive to flame spectrum.

It produces the one channel output signal at the D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.

Click here to watch the video of this product

Single Channel 5V Relay Module for projects

admin — Sat, 08 Apr 2023 10:19:45 +0000

This is 1 Channel 5V Relay Board Module For Arduino PIC AVR DSP ARM. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on can control it.

Each one needs 15mA – 20mA driver current and Equipped with high current relay: DC 5V / 10A, AC 250V / 10A

Standard interface that can be compatible with microcontroller.

Click Here to watch the video of the product

L293D Motor Driver Shield for Arduino

admin — Wed, 18 May 2022 09:01:54 +0000

This L293D Motor Driver Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.

This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.

L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically, this means using this chip you can use DC motors and power supplies of up to 36 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. a motor.

Package include:- L293D Sheild – 1 Piece

MQ3 Alcohol Gas Sensor Module

admin — Tue, 10 May 2022 07:02:22 +0000

This is a very easy to use low cost semiconductor Gas sensor Module with analog and digital output. This module uses MQ3 Alcohol gas sensor as a alcohol gas sensing element. It requires no external components just plug in Vcc & ground pins and you are ready to go.

For Digital output the threshold value can be easily set by an on-board potentiometer. Using this module you can easily interface MQ3 Alcohol sensor to any Microcontroller, Arduino or even Raspberry Pi.

Since this Gas Sensor module is sensitive to alcohol it can be used in breathalyser. MQ3 Sensor also has small sensitivity to Benzine.

Package include:- MQ3 Module – 1 Piece

* Product Images are shown for illustrative purposes only and may differ from actual product.

RC522 RFID 13.56MHZ Reader Writer Module

admin — Wed, 29 Dec 2021 14:26:28 +0000

RC522 – RFID Reader / Writer 13.56MHz with Cards Kit includes a 13.56MHz RF reader cum writer module that uses an RC522 IC and two S50 RFID cards. The MF RC522 is a highly integrated transmission module for contact-less communication at 13.56 MHz. RC522 supports ISO 14443A/MIFARE mode.

RC522 – RFID Reader features an outstanding modulation and demodulation algorithm to serve effortless RF communication at 13.56 MHz. The S50 RFID Cards will ease up the process helping you to learn and add the 13.56 MHz RF transition to your project.

The module uses SPI to communicate with microcontrollers. The open-hardware community already has a lot of projects exploiting the RC522 – RFID Communication, using Arduino.

Package include:- RFID Keychain Module – 1 Piece